? semiconductor components industries, llc, 2014 october, 2014 ? rev. 1 1 publication order number: ESD6100/d ESD6100 2 channel very low capacitance esd protection device in csp product description the ESD6100 is a 4?bump very low capacitance esd protection device in 0.4 mm csp form factor. it is fully compliant with iec 61000?4?2. the ESD6100 is rohs ii compliant. table 1. pin descriptions 4?bump csp package pin description a1 esd channel 1 a2 esd channel 2 b1 and b2 device ground package / pinout diagrams bottom view (bumps up view) top view (bumps down view) px 4?bump csp package + 12 a b orientation marking a b a1 a2 b1 b2 a1 1 2 orientation marking where x = a = ww01, ww02 j = ww19, ww20 s = ww37, ww38 b = ww03, ww04 k = ww21, ww22 t = ww39, ww40 c = ww05, ww06 l = ww23, ww24 u = ww41, ww42 d = ww06, ww08 m = ww25, ww26 v = ww43, ww44 e = ww08, ww10 n = ww27, ww28 w = ww45, ww46 f = ww11, ww12 o = ww29, ww30 x = ww47, ww48 g = ww13, ww14 p = ww31, ww32 y = ww49, ww50 h = ww15, ww16 q = ww33, ww34 z = ww51, ww52 i = ww17, ww18 r = ww35, ww36 marking diagram device package shipping ? ordering information http://onsemi.com wlcsp4 (pb?free) 10000/tape & reel ESD6100 p = ESD6100 x = single digit date code wlcsp4 case 567cb ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specification brochure, brd8011/d. electrical schematic px ch1 (a1) ch2 (a2) gnd (b1) gnd (b2)
ESD6100 http://onsemi.com 2 electrical specifications and conditions table 2. parameters and operating conditions parameter rating units storage temperature range ?55 to +150 c operating temperature range ?40 to +85 c functional operation above the stresses listed in the recommended operating ranges is not implied. extended exposure to stresse s beyond the recommended operating ranges limits may affect device reliability. table 3. electrical operating characteristics (note 1) symbol parameter conditions min typ max units v in input operating supply voltage 3.0 5.5 v v b breakdown voltage (positive) i f = 1 ma 6 v i leak channel leakage current v in = 3 v (note 2) 1.0 100 na c in channel input capacitance at 1 mhz, v in = 0 v (note 2) 1.5 pf c in channel input capacitance matching at 1 mhz, v in = 0 v (note 2) 0.02 pf v esd esd protection peak discharge voltage at any channel input a) contact discharge per iec 61000?4?2 standard b) air discharge per iec 61000?4?2 standard (notes 2 and 3) 8 15 kv v cl channel clamp voltage positive transients negative transients i pp = 1 a, t p = 8/20 s (note 2) +9.8 ?1.5 v r dyn dynamic resistance positive transients negative transients i pp = 1 a, t p = 8/20 s any i/o pin to ground (note 2) 0.7 0.5 product parametric performance is indicated in the electrical characteristics for the listed test conditions, unless otherwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. 1. all parameters specified at t a = 25 c unless otherwise noted. 2. these parameters are guaranteed by design and characterization. 3. standard iec 61000?4?2 with c discharge = 150 pf, r discharge = 330 .
ESD6100 http://onsemi.com 3 package dimensions wlcsp4, 0.8x0.8 case 567cb issue o seating plane 0.05 c notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. coplanarity applies to spherical crowns of solder balls. 2x dim a min max 0.57 millimeters a1 d 0.80 bsc e b 0.24 0.29 e 0.40 bsc 0.63 d e a b pin a1 reference e a 0.05 b c 0.03 c 0.05 c 4x b 12 b a 0.05 c a a1 a2 c 0.17 0.24 0.80 bsc 0.05 c 2x top view side view bottom view note 3 e a2 0.41 ref pitch 0.25 4x dimensions: millimeters *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint* 0.40 0.40 recommended a1 package outline pitch p ublication ordering information n. american technical support : 800?282?9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81?3?5817?1050 ESD6100/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your loc al sales representative on semiconductor and the are registered trademarks of semiconductor components industries, llc (scillc) or its subsidia ries in the united states and/or other countries. scillc owns the rights to a number of pa tents, trademarks, copyrights, trade secret s, and other intellectual property. a listin g of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent?marking.pdf. scillc reserves the right to make changes without further notice to any product s herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any part icular purpose, nor does sci llc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typi cal? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating param eters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgic al implant into the body, or other applications intended to s upport or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer s hall indemnify and hold scillc and its officers , employees, subsidiaries, affiliates, and dist ributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufac ture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner.
|
